Evening all - ordered the z table and rotary, I'm running smoothie on a Cohesion 3D and wondering if I can do the following - do I really need to use external stepper adaptors and drivers of can I just add 2 more A4988
Evening all - ordered the z table and rotary, I’m running smoothie on a Cohesion 3D and wondering if I can do the following - do I really need to use external stepper adaptors and drivers of can I just add 2 more A4988 drivers and use the z for bed height (controlled by jog function on the C3D LCD ) and the rotary on the A connector - using Lightburn ?
“LA12 Sports Images LA12 Sports Images”
Joe Alexander June 12, 2018 18:46
you should be able to as long as the motors for those axes don’t exceed the amperage of the A4988’s (which I believe is 2A max). as for Lightburn I couldn’t tell you since I use Laserweb4. I’m sure one of the group members can shed some light on that facet.
LA12 Sports Images LA12 Sports Images June 12, 2018 19:08
+Joe Alexander Thank you
Ray Kholodovsky (Cohesion3D) June 12, 2018 21:21
It’s not a 2a max, it’s much lower than that. You’re welcome to try the A4988’s to see if they can provide enough power. They might not be able to. It depends on your z table, how much current the motor draws…
LA12 Sports Images LA12 Sports Images June 12, 2018 21:30
Thanks Ray - are the Z and A ports enabled by default or do I need to use different firmware ?
LA12 Sports Images LA12 Sports Images June 12, 2018 21:33
They are Holgamods devices but considering using a Nema17 for the table instead of the monster standard unit - the rotary is a 17 as standard I believe
Ray Kholodovsky (Cohesion3D) June 12, 2018 21:37
Please read the instructions at Cohesion3D.com/start cohesion3d.com - Getting Started
LA12 Sports Images LA12 Sports Images June 12, 2018 21:45
Ok I’m using Lightburn so will try to muddle through
Imported from Google+ — content and formatting may not be reliable