So I settled on using a AC air pump for my air assist
So I settled on using a AC air pump for my air assist. Anyone have recommendations on a switch I can can attach to the C3D board to toggle a AC component via gcode and how one would go about setting it up? Thanks much.
“Kelly S”
Ray Kholodovsky (Cohesion3D) December 20, 2016 17:33
Use an AC SSR and use the “extruder” MOSFET to control it. (The rightmost pair of the green terminals)
Antonio Garcia December 20, 2016 18:47
+Kelly S has to take some pictures of that machine, when you finish all your upgrades!!! I´m still waiting for my C3D, so i hope after Christmas i can start with those kind of upgrades :)
Kelly S December 20, 2016 19:04
+Antonio Garcia oh I will. :D
Ray Kholodovsky (Cohesion3D) December 20, 2016 19:05
FedEx came a bit earlier than expected. Only the 2 samples :) testing now.
Kelly S December 20, 2016 19:11
Awesome +Ray Kholodovskyay, look forward to your results so I can duplicate them in my build.
Don Kleinschnitz Jr. December 20, 2016 19:24
An SSR is the best choice but some AC devices will not work with a SSR. For example, my vacuum blower will not and I have no idea why but it will not run full speed with an SCR.
So I went with a 4x relay board with optically isolated inputs, electrically more noisy but I know it will work with all devices AC or DC.
An open collector/drain input to these boards allows multiple sources to turn on the relays at the same time such as smoothie and a control panel switch.
Check out my
http://donsthings.blogspot.com/2016/11/the-k40-total-conversion.html
…….for schematics and details.
amazon.com - Amazon.com: SainSmart 4-Channel Relay Module: Cell Phones & Accessories
Kelly S December 20, 2016 20:12
I looked but did not see exactly how you implemented the 4-Channel Relay Module
am I blind? :P +Don Kleinschnitz
Don Kleinschnitz Jr. December 21, 2016 01:30
+Kelly S its here in the schematics:
look at the “power Control” tab:
http://www.digikey.com/schemeit/project/k40-s-21-8SM4SO8200E0/
Imported from Google+ — content and formatting may not be reliable