Hey all Im moving my mini controller over to a custom built cutter.

Is there anything in the smoothie config I need to change, when changing over to mechanical end stops? End stops are still both in the LEFT rear. Do I need to change the alpha and Beta max travel when homing to say 950 on both?

Also my cut area is now 24in or 609.6mm in the Y axis and 36in or 914.4mm in the X axis, is there anything that needs to be changed? The max area is slightly larger but this is the max area I need to keep to.

Also not sure of the offset in the X and Y yet to place the cutter at zero after homing. What is the offset in smoothie called?

Im used to Marlin but smoothie is completely alien to me.

“Chad Traywick”



Tech Bravo (Tech BravoTN) September 11, 2018 01:10

Id say max travel may need to reflect the new bed size. Bed size info here. https://www.lasergods.com/setting-custom-bed-size-for-the-cohesion3d-mini/

lasergods.com - Setting Custom Bed Size For The Cohesion3d Mini - LaserGods Laser Engraver Info Portal


Tech Bravo (Tech BravoTN) September 11, 2018 01:15

Here is more on config. http://smoothieware.org/configuration-options


Chad Traywick September 11, 2018 01:43

Awesome! Thanks so much!


Imported from Google+ — content and formatting may not be reliable