Ray et al- Are there different version of the mini?
Ray et al-
Are there different version of the mini?
This pic shows 6 endstops, but the description of the board says 3.
http://cohesion3d.com/product_images/uploaded_images/talos-tria-with-c3d-mini-5.png
If we are limited to 4, can we wire the MIN stops for homing and wire the rest to one of the MAX’s in series to act like a stop limit switch?
I am building a Eustathios currently using a leftover RAMPs 1.4 and am looking to upgrade once I get it printing.
Thanks
Dennis
“Dennis P”
Ray Kholodovsky (Cohesion3D) February 05, 2018 19:19
There is only one version of the Mini, it is the main product photo.
There are 4 “protected” endstop inputs and the remaining 2 are exposed as simple GPIO pins. You can plug switches into them also.
The picture you reference is a pre-production prototype that Eric was testing for me.
Ray Kholodovsky (Cohesion3D) February 05, 2018 19:51
Mini Pinout Diagram: cohesion3d.freshdesk.com - Cohesion3D Mini Pinout Diagram : Cohesion3D
Dennis P February 05, 2018 20:35
Thanks Ray!
Imported from Google+ — content and formatting may not be reliable